PDA

View Full Version : Chevy small block heads


Pete_48anglia
09-24-2009, 08:12 AM
23 degree sb heads : Phase 2 bowtie heads straight plug much work in them Ti. retainers 1.5 springs assembled and ready to run have 2 dyno pulls and about 100 street miles made 596 hp on a 385 ci sb.(1 pair)
23 degree phase 2 heads bare, angle plugs (1pair)
Dash 8 Brodix heads disassembled but have the pieces seats freshly cut.(1 pair, aluminum)
stock 350 heads recent valve job by Merkel have about 500 miles on them. They were on a 300 hp engine, 1.9 I 1.6 E valve size. (1 pair)
T400 tranny, with a brake(Transmission Specialties) and reverse valve body and a Cheeta shifter
9 inch converter (Trans King)
Nothing here is over $400...........some things less ask for details on anything
Pete_48anglia
10-08-2009, 09:58 AM
23 degree sb heads : Phase 2 bowtie heads straight plug much work in them Ti. retainers 1.5 springs assembled and ready to run have 2 dyno pulls and about 100 street miles made 596 hp on a 385 ci sb.(1 pair)
23 degree phase 2 heads bare, angle plugs (1pair)
Dash 8 Brodix heads disassembled but have the pieces seats freshly cut.(1 pair, aluminum)
stock 350 heads recent valve job by Merkel have about 500 miles on them. They were on a 300 hp engine, 1.9 I 1.6 E valve size. (1 pair)
T400 tranny, with a brake(Transmission Specialties) and reverse valve body and a Cheeta shifter
9 inch converter (Trans King)
Nothing here is over $400...........some things less ask for details on anything
The T400 went in the shop yesterday (Auto Tech Transmissions) They are going to replace the clutches and seals and totally freshen it. After that it will be for sale again, Not sure of the price yet until I get the bill, but it will be over the $400 mark. It will be a nice tranny though went over 200 low 10 sec passes in a 2640 lb car with no problems. They guarantee their work.
Pete
Tmac
10-11-2009, 12:29 PM
Still got the brodix heads
Pete_48anglia
10-13-2009, 07:56 AM
Yes Still got em.
Tmac
11-23-2009, 10:18 PM
Pete I'm back on my regular schedule do you still have stuff?
Pete_48anglia
11-24-2009, 07:51 AM
The converter is sold still got the heads, the t400 is back from the shop refreshed.